Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

VCI - Visual Cylinder Inspection® Course - This is the core certification course provided by PSI-PCI and in it we teach the regulations and fundamentals of conducting visual inspections of solid wall and composite SCUBA and SCBA cylinders. The full day course is suited for those new to visual inspection as well as those who have been inspecting without formal training through its wide range of inspection subjects including damage limits, neck cracking and other cylinder issues, plus laws affecting inspectors. Additionally, this course meets the OSHA and DOT requirements for employee HAZMAT training and attendants completing the course are qualified to conduct HAZMAT training for cylinder handlers. The course also provides an overview of a variety of associated topics including requalification, oxygen cleaning, valve repair, tools, and more. For more formal training on these topics refer to Specialties below. It is the only training formally endorsed, referred to and utilized by the cylinder manufacturers; and recognized by USDOT, Compressed Gas Association, NFPA and others. It continues to be the most up to date training available today on this subject. Previously certified inspectors may attend this full course under the VCIR for re-qualification (see below). The course is open to anyone 16 years or older and no previous cylinder inspection experience is required. Participants receive certificate for Visual Cylinder Inspection upon course completion valid for 3 years per Federal training requirements.

VRT - Valve Repair Technician - This course provides a broad overview of valve types, valve repair and valve care and maintenance. It is approved and contributed to by many valve manufacturers. Students will be provided a Certificate of Completion.

OCCT - Oxygen Cylinder Cleaning Technician - This course offers information and inspection training specific to cleaning oxygen service cylinders. The course has been designed by true experts and engineers in the gas industry on the subject of oxygen. Handlers of oxygen are federally required to have training and the PSI-PCI course meets those requirements. Because of its part in the inspection process, attendees are required to be currently certified as PSI-PCI Visual Cylinder Inspectors. Students will be provided a Certificate of Completion.

This certification course teaches the basics of conducting the annual visual inspections of solid wall and composite SCUBA and SCBA cylinders. The 6 – 8 hour course is suited for those new to visual inspection well as those who have been inspecting without formal training through its wide range of inspection subjects including damage limits, neck cracking, and laws affecting inspectors. Additional, this course meets the OSHA and DOT requirements for employee HAZMAT training and attendants completing the course are qualified to conduct HAZMAT training for cylinder handlers. Previously certified inspectors may attend this full course under the VCIR for re-qualification. No previous cylinder inspection experience is required. You must be 18 years old to receive certification. Participates receive certification as Visual Cylinder Inspectors upon course completion. This course includes manual, hand outs and certification from PSI

This 2 hour course provides a broad overview of valve types, valve repair and valve care. It is approved by the valve manufacturers. Students will be provided a Certificate of Completion. This course includes material and certificate for $185.00.

this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

This 2 hour course provides detailed information on O2 cleaning scuba cylinders for enriched air uses. This course has been endorsed by all major scuba cylinder manufacturers and valve manufacturers. You will learn proper cleaning techniques as well as understand the risk and liability. The cost of this course is $185.00.

This 3 hour course provides Visual Cylinder Inspectors with the added training to know when and how to conduct a proper Eddy Current Tests of SCUBA and SCBA cylinders in addition to hands on experience with Eddy Current devices. Attendants are required to be certified by PSI as Visual Cylinder Inspectors, and current on the rating. Participate receive certification as Eddy Current Service Technician upon course completion. This course includes material and certificate for $185.00. If you have been previously trained as an Eddy Current Service Technician, you must be retrained at least every 3 years, and must attend the full course again. This will cost the full price of the course, at $185.00.

this is a recertificion class. you must either be still active or with 90 days since it has expired. this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

This discounted price point is available to previously trained PSI-PCI Inspectors that have exceeded the Federally required three year recurrent training requirement and need to renew. This is the full day course at an alumni rate will be held onsight at Gypsy Divers.

PSI-PCI, Inc. is the only company whose training is endorsed, referred to and utilized by cylinder manufacturers; and recognized by USDOT and Compressed Gas Association. You won't find our level of professionalism, comprehensive support and consultation anywhere else! PSI-PCI is your Cylinder Safety Solution!

This Visual Cylinder Inspection® certification course teaches the regulations and fundamentals of conducting visual inspections of solid wall and composite SCUBA and SCBA cylinders. The full day course is suited for those new to visual inspection as well as those who have been inspecting without formal training through its wide range of inspection subjects including damage limits, neck cracking, and laws affecting inspectors. -Additionally, this course meets the OSHA and DOT requirements for employee HAZMAT training and students completing the course are qualified to conduct HAZMAT training for other cylinder handlers.



-PSI-PCI, Inc. is regarded as the authority on Visual Cylinder Inspection our programs have been created by industry experts from many pertinent fields to provide a cohesive, informative certification program.



-PSI-PCI offers the only training that is formally endorsed, referred to and utilized by cylinder manufacturers; and recognized by USDOT and Compressed Gas Association. You won't find our level of professionalism, comprehensive support and consultation anywhere else! PSI-PCI is your Cylinder Safety Solution!

this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

Contact E.K. Sowell on cell with message or text for more information. We normally start at 10 am so you can drive in. Fee includes workbook, textbook, registration fees and instruction.

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

This Visual Cylinder Inspection® certification course teaches the regulations and fundamentals of conducting visual inspections of solid wall and composite SCUBA and SCBA cylinders. The full day course is suited for those new to visual inspection as well as those who have been inspecting without formal training through its wide range of inspection subjects including damage limits, neck cracking, and laws affecting inspectors.

Additionally, this course meets the OSHA and DOT requirements for employee HAZMAT training and students completing the course are qualified to conduct HAZMAT training for other cylinder handlers.

PSI-PCI remains the only training for Visual Cylinder Inspection that is formally endorsed, utilized and referred to by the cylinder manufacturers; and recognized by USDOT, Compressed Gas Association and NIOSH. Join the team of professional PSI-PCI inspectors today and you too can be a part of the Cylinder Safety Solution!

This discounted price point is available to previously trained PSI-PCI Inspectors that have exceeded the Federally required three year recurrent training requirement and need to renew. This is the full VCI course at an alumni rate.

Prerequisite: Current PSI-PCI Visual Cylinder Inspection®

The PSI-PCI Oxygen Cylinder Cleaning Technician course offers information and inspection training specific to cleaning oxygen service cylinders. The course has been created by true experts and engineers in the gas industry on the subject of oxygen/enriched air service cylinders.

PSI-PCI remains the only training for Visual Cylinder Inspection that is formally endorsed, utilized and referred to by the cylinder manufacturers; and recognized by USDOT, Compressed Gas Association and NIOSH. Join the team of professional PSI-PCI inspectors today and you too can be a part of the Cylinder Safety Solution!

The PSI-PCI Update is designed to meet the recurrent training requirements for a current PSI-PCI trained inspector with information on recent changes to cylinders and inspection standards as well as keeping you abreast of current happenings.

Additionally, this update meets the OSHA and DOT 3 year recurrent training requirements for cylinder HAZMAT handling. PSI-PCI, Inc. is regarded as the authority on Visual Cylinder Inspection and associated programs. Our programs have been created by industry experts from many pertinent fields to ensure inspectors meet their recurrent training requirements under the CFR.

The PSI-PCI Valve Repair Technician course provides a broad overview of valve types, valve repair and valve care and maintenance. It is approved by major valve manufacturers - who have provided valuable input to the program!

PSI-PCI remains the only training for Visual Cylinder Inspection that is formally endorsed, utilized and referred to by the cylinder manufacturers; and recognized by USDOT, Compressed Gas Association and NIOSH. Join the team of professional PSI-PCI inspectors today and you too can be a part of the Cylinder Safety Solution!

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

this is a recertificion class. you must either be still active or with 90 days since it has expired. this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

Contact E.K. Sowell on cell with message or text for more information. We normally start at 10 am so you can drive in. Fee includes workbook, textbook, registration fees and instruction.

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

VCI - Visual Cylinder Inspection® Course - This is the core certification course provided by PSI-PCI and in it we teach the regulations and fundamentals of conducting visual inspections of solid wall and composite SCUBA and SCBA cylinders. The full day course is suited for those new to visual inspection as well as those who have been inspecting without formal training through its wide range of inspection subjects including damage limits, neck cracking and other cylinder issues, plus laws affecting inspectors. Additionally, this course meets the OSHA and DOT requirements for employee HAZMAT training and attendants completing the course are qualified to conduct HAZMAT training for cylinder handlers. The course also provides an overview of a variety of associated topics including requalification, oxygen cleaning, valve repair, tools, and more. For more formal training on these topics refer to Specialties below. It is the only training formally endorsed, referred to and utilized by the cylinder manufacturers; and recognized by USDOT, Compressed Gas Association, NFPA and others. It continues to be the most up to date training available today on this subject. Previously certified inspectors may attend this full course under the VCIR for re-qualification (see below). The course is open to anyone 16 years or older and no previous cylinder inspection experience is required. Participants receive certificate for Visual Cylinder Inspection upon course completion valid for 3 years per Federal training requirements.

This certification course teaches the basics of conducting the annual visual inspections of solid wall and composite SCUBA and SCBA cylinders. The 6 – 8 hour course is suited for those new to visual inspection well as those who have been inspecting without formal training through its wide range of inspection subjects including damage limits, neck cracking, and laws affecting inspectors. Additional, this course meets the OSHA and DOT requirements for employee HAZMAT training and attendants completing the course are qualified to conduct HAZMAT training for cylinder handlers. Previously certified inspectors may attend this full course under the VCIR for re-qualification. No previous cylinder inspection experience is required. You must be 18 years old to receive certification. Participates receive certification as Visual Cylinder Inspectors upon course completion. This course includes manual, hand outs and certification from PSI

This 3 hour course provides Visual Cylinder Inspectors with the added training to know when and how to conduct a proper Eddy Current Tests of SCUBA and SCBA cylinders in addition to hands on experience with Eddy Current devices. Attendants are required to be certified by PSI as Visual Cylinder Inspectors, and current on the rating. Participate receive certification as Eddy Current Service Technician upon course completion. This course includes material and certificate for $185.00. If you have been previously trained as an Eddy Current Service Technician, you must be retrained at least every 3 years, and must attend the full course again. This will cost the full price of the course, at $185.00.

This 2 hour course provides a broad overview of valve types, valve repair and valve care. It is approved by the valve manufacturers. Students will be provided a Certificate of Completion. This course includes material and certificate for $185.00.

This 2 hour course provides detailed information on O2 cleaning scuba cylinders for enriched air uses. This course has been endorsed by all major scuba cylinder manufacturers and valve manufacturers. You will learn proper cleaning techniques as well as understand the risk and liability. The cost of this course is $185.00.

VRT - Valve Repair Technician - This course provides a broad overview of valve types, valve repair and valve care and maintenance. It is approved and contributed to by many valve manufacturers. Students will be provided a Certificate of Completion.

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

OCCT - Oxygen Cylinder Cleaning Technician - This course offers information and inspection training specific to cleaning oxygen service cylinders. The course has been designed by true experts and engineers in the gas industry on the subject of oxygen. Handlers of oxygen are federally required to have training and the PSI-PCI course meets those requirements. Because of its part in the inspection process, attendees are required to be currently certified as PSI-PCI Visual Cylinder Inspectors. Students will be provided a Certificate of Completion.

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

This certification course teaches the basics of conducting the annual visual inspections of solid wall and composite SCUBA and SCBA cylinders. The 6 – 8 hour course is suited for those new to visual inspection well as those who have been inspecting without formal training through its wide range of inspection subjects including damage limits, neck cracking, and laws affecting inspectors. Additional, this course meets the OSHA and DOT requirements for employee HAZMAT training and attendants completing the course are qualified to conduct HAZMAT training for cylinder handlers. Previously certified inspectors may attend this full course under the VCIR for re-qualification. No previous cylinder inspection experience is required. You must be 18 years old to receive certification. Participates receive certification as Visual Cylinder Inspectors upon course completion. This course includes manual, hand outs and certification from PSI

This 3 hour course provides Visual Cylinder Inspectors with the added training to know when and how to conduct a proper Eddy Current Tests of SCUBA and SCBA cylinders in addition to hands on experience with Eddy Current devices. Attendants are required to be certified by PSI as Visual Cylinder Inspectors, and current on the rating. Participate receive certification as Eddy Current Service Technician upon course completion. This course includes material and certificate for $185.00. If you have been previously trained as an Eddy Current Service Technician, you must be retrained at least every 3 years, and must attend the full course again. This will cost the full price of the course, at $185.00.

This 2 hour course provides a broad overview of valve types, valve repair and valve care. It is approved by the valve manufacturers. Students will be provided a Certificate of Completion. This course includes material and certificate for $185.00.

This 2 hour course provides detailed information on O2 cleaning scuba cylinders for enriched air uses. This course has been endorsed by all major scuba cylinder manufacturers and valve manufacturers. You will learn proper cleaning techniques as well as understand the risk and liability. The cost of this course is $185.00.

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

Contact E.K. Sowell on cell with message or text for more information. We normally start at 10 am so you can drive in. Fee includes workbook, textbook, registration fees and instruction.

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

this is a recertificion class. you must either be still active or with 90 days since it has expired. this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

VCI - Visual Cylinder Inspection® Course - This is the core certification course provided by PSI-PCI and in it we teach the regulations and fundamentals of conducting visual inspections of solid wall and composite SCUBA and SCBA cylinders. The full day course is suited for those new to visual inspection as well as those who have been inspecting without formal training through its wide range of inspection subjects including damage limits, neck cracking and other cylinder issues, plus laws affecting inspectors. Additionally, this course meets the OSHA and DOT requirements for employee HAZMAT training and attendants completing the course are qualified to conduct HAZMAT training for cylinder handlers. The course also provides an overview of a variety of associated topics including requalification, oxygen cleaning, valve repair, tools, and more. For more formal training on these topics refer to Specialties below. It is the only training formally endorsed, referred to and utilized by the cylinder manufacturers; and recognized by USDOT, Compressed Gas Association, NFPA and others. It continues to be the most up to date training available today on this subject. Previously certified inspectors may attend this full course under the VCIR for re-qualification (see below). The course is open to anyone 16 years or older and no previous cylinder inspection experience is required. Participants receive certificate for Visual Cylinder Inspection upon course completion valid for 3 years per Federal training requirements.

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

VRT - Valve Repair Technician - This course provides a broad overview of valve types, valve repair and valve care and maintenance. It is approved and contributed to by many valve manufacturers. Students will be provided a Certificate of Completion.

Contact E.K. Sowell on cell with message or text for more information. We normally start at 10 am so you can drive in. Fee includes workbook, textbook, registration fees and instruction.

https://www.facebook.com/profile.php?id=100092611943195

This certification course teaches the basics of conducting the annual visual inspections of solid wall and composite SCUBA and SCBA cylinders. The 6 – 8 hour course is suited for those new to visual inspection well as those who have been inspecting without formal training through its wide range of inspection subjects including damage limits, neck cracking, and laws affecting inspectors. Additional, this course meets the OSHA and DOT requirements for employee HAZMAT training and attendants completing the course are qualified to conduct HAZMAT training for cylinder handlers. Previously certified inspectors may attend this full course under the VCIR for re-qualification. No previous cylinder inspection experience is required. You must be 18 years old to receive certification. Participates receive certification as Visual Cylinder Inspectors upon course completion. This course includes manual, hand outs and certification from PSI

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

This 3 hour course provides Visual Cylinder Inspectors with the added training to know when and how to conduct a proper Eddy Current Tests of SCUBA and SCBA cylinders in addition to hands on experience with Eddy Current devices. Attendants are required to be certified by PSI as Visual Cylinder Inspectors, and current on the rating. Participate receive certification as Eddy Current Service Technician upon course completion. This course includes material and certificate for $185.00. If you have been previously trained as an Eddy Current Service Technician, you must be retrained at least every 3 years, and must attend the full course again. This will cost the full price of the course, at $185.00.

This 2 hour course provides a broad overview of valve types, valve repair and valve care. It is approved by the valve manufacturers. Students will be provided a Certificate of Completion. This course includes material and certificate for $185.00.

this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

This 2 hour course provides detailed information on O2 cleaning scuba cylinders for enriched air uses. This course has been endorsed by all major scuba cylinder manufacturers and valve manufacturers. You will learn proper cleaning techniques as well as understand the risk and liability. The cost of this course is $185.00.

this is a recertificion class. you must either be still active or with 90 days since it has expired. this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

Contact E.K. Sowell on cell with message or text for more information. We normally start at 10 am so you can drive in. Fee includes workbook, textbook, registration fees and instruction.

this is a recertificion class. you must either be still active or with 90 days since it has expired. this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

Please email (omnidive@gmail.com) or call (360-991-2999) (Eastern time zone) the instructor to determine the exact location and the start time of the course. In addition, OCCT, VRT and ECT courses are offered but not listed on the PSI-PCI calendar. Course times and actual dates may very depending on both of our respective schedules, thanks Phillip Graf, PSI-PCI Instructor!

VCI - Visual Cylinder Inspection® Course - This is the core certification course provided by PSI-PCI and in it we teach the regulations and fundamentals of conducting visual inspections of solid wall and composite SCUBA and SCBA cylinders. The full day course is suited for those new to visual inspection as well as those who have been inspecting without formal training through its wide range of inspection subjects including damage limits, neck cracking and other cylinder issues, plus laws affecting inspectors. Additionally, this course meets the OSHA and DOT requirements for employee HAZMAT training and attendants completing the course are qualified to conduct HAZMAT training for cylinder handlers. The course also provides an overview of a variety of associated topics including requalification, oxygen cleaning, valve repair, tools, and more. For more formal training on these topics refer to Specialties below. It is the only training formally endorsed, referred to and utilized by the cylinder manufacturers; and recognized by USDOT, Compressed Gas Association, NFPA and others. It continues to be the most up to date training available today on this subject. Previously certified inspectors may attend this full course under the VCIR for re-qualification (see below). The course is open to anyone 16 years or older and no previous cylinder inspection experience is required. Participants receive certificate for Visual Cylinder Inspection upon course completion valid for 3 years per Federal training requirements.

VRT - Valve Repair Technician - This course provides a broad overview of valve types, valve repair and valve care and maintenance. It is approved and contributed to by many valve manufacturers. Students will be provided a Certificate of Completion.

OCCT - Oxygen Cylinder Cleaning Technician - This course offers information and inspection training specific to cleaning oxygen service cylinders. The course has been designed by true experts and engineers in the gas industry on the subject of oxygen. Handlers of oxygen are federally required to have training and the PSI-PCI course meets those requirements. Because of its part in the inspection process, attendees are required to be currently certified as PSI-PCI Visual Cylinder Inspectors. Students will be provided a Certificate of Completion.

This certification course teaches the basics of conducting the annual visual inspections of solid wall and composite SCUBA and SCBA cylinders. The 6 – 8 hour course is suited for those new to visual inspection well as those who have been inspecting without formal training through its wide range of inspection subjects including damage limits, neck cracking, and laws affecting inspectors. Additional, this course meets the OSHA and DOT requirements for employee HAZMAT training and attendants completing the course are qualified to conduct HAZMAT training for cylinder handlers. Previously certified inspectors may attend this full course under the VCIR for re-qualification. No previous cylinder inspection experience is required. You must be 18 years old to receive certification. Participates receive certification as Visual Cylinder Inspectors upon course completion. This course includes manual, hand outs and certification from PSI

This 2 hour course provides a broad overview of valve types, valve repair and valve care. It is approved by the valve manufacturers. Students will be provided a Certificate of Completion. This course includes material and certificate for $185.00.

This 3 hour course provides Visual Cylinder Inspectors with the added training to know when and how to conduct a proper Eddy Current Tests of SCUBA and SCBA cylinders in addition to hands on experience with Eddy Current devices. Attendants are required to be certified by PSI as Visual Cylinder Inspectors, and current on the rating. Participate receive certification as Eddy Current Service Technician upon course completion. This course includes material and certificate for $185.00. If you have been previously trained as an Eddy Current Service Technician, you must be retrained at least every 3 years, and must attend the full course again. This will cost the full price of the course, at $185.00.

VCI - Visual Cylinder Inspection® Course - This is the core certification course provided by PSI-PCI and in it we teach the regulations and fundamentals of conducting visual inspections of solid wall and composite SCUBA and SCBA cylinders. The full day course is suited for those new to visual inspection as well as those who have been inspecting without formal training through its wide range of inspection subjects including damage limits, neck cracking and other cylinder issues, plus laws affecting inspectors. Additionally, this course meets the OSHA and DOT requirements for employee HAZMAT training and attendants completing the course are qualified to conduct HAZMAT training for cylinder handlers. The course also provides an overview of a variety of associated topics including requalification, oxygen cleaning, valve repair, tools, and more. For more formal training on these topics refer to Specialties below. It is the only training formally endorsed, referred to and utilized by the cylinder manufacturers; and recognized by USDOT, Compressed Gas Association, NFPA and others. It continues to be the most up to date training available today on this subject. Previously certified inspectors may attend this full course under the VCIR for re-qualification (see below). The course is open to anyone 16 years or older and no previous cylinder inspection experience is required. Participants receive certificate for Visual Cylinder Inspection upon course completion valid for 3 years per Federal training requirements.

VRT - Valve Repair Technician - This course provides a broad overview of valve types, valve repair and valve care and maintenance. It is approved and contributed to by many valve manufacturers. Students will be provided a Certificate of Completion.

this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

this is a recertificion class. you must either be still active or with 90 days since it has expired. this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

This certification course teaches the basics of conducting the annual visual inspections of solid wall and composite SCUBA and SCBA cylinders. The 6 – 8 hour course is suited for those new to visual inspection well as those who have been inspecting without formal training through its wide range of inspection subjects including damage limits, neck cracking, and laws affecting inspectors. Additional, this course meets the OSHA and DOT requirements for employee HAZMAT training and attendants completing the course are qualified to conduct HAZMAT training for cylinder handlers. Previously certified inspectors may attend this full course under the VCIR for re-qualification. No previous cylinder inspection experience is required. You must be 18 years old to receive certification. Participates receive certification as Visual Cylinder Inspectors upon course completion. This course includes manual, hand outs and certification from PSI

This 2 hour course provides a broad overview of valve types, valve repair and valve care. It is approved by the valve manufacturers. Students will be provided a Certificate of Completion. This course includes material and certificate for $185.00.

This 3 hour course provides Visual Cylinder Inspectors with the added training to know when and how to conduct a proper Eddy Current Tests of SCUBA and SCBA cylinders in addition to hands on experience with Eddy Current devices. Attendants are required to be certified by PSI as Visual Cylinder Inspectors, and current on the rating. Participate receive certification as Eddy Current Service Technician upon course completion. This course includes material and certificate for $185.00. If you have been previously trained as an Eddy Current Service Technician, you must be retrained at least every 3 years, and must attend the full course again. This will cost the full price of the course, at $185.00.

This 2 hour course provides detailed information on O2 cleaning scuba cylinders for enriched air uses. This course has been endorsed by all major scuba cylinder manufacturers and valve manufacturers. You will learn proper cleaning techniques as well as understand the risk and liability. The cost of this course is $185.00.

Contact E.K. Sowell on cell with message or text for more information. We normally start at 10 am so you can drive in. Fee includes workbook, textbook, registration fees and instruction.

This 2 hour course provides detailed information on O2 cleaning scuba cylinders for enriched air uses. This course has been endorsed by all major scuba cylinder manufacturers and valve manufacturers. You will learn proper cleaning techniques as well as understand the risk and liability. The cost of this course is $185.00.

This certification course teaches the basics of conducting the annual visual inspections of solid wall and composite SCUBA and SCBA cylinders. The 6 – 8 hour course is suited for those new to visual inspection well as those who have been inspecting without formal training through its wide range of inspection subjects including damage limits, neck cracking, and laws affecting inspectors. Additional, this course meets the OSHA and DOT requirements for employee HAZMAT training and attendants completing the course are qualified to conduct HAZMAT training for cylinder handlers. Previously certified inspectors may attend this full course under the VCIR for re-qualification. No previous cylinder inspection experience is required. You must be 18 years old to receive certification. Participates receive certification as Visual Cylinder Inspectors upon course completion. This course includes manual, hand outs and certification from PSI

This 2 hour course provides a broad overview of valve types, valve repair and valve care. It is approved by the valve manufacturers. Students will be provided a Certificate of Completion. This course includes material and certificate for $185.00.

This 3 hour course provides Visual Cylinder Inspectors with the added training to know when and how to conduct a proper Eddy Current Tests of SCUBA and SCBA cylinders in addition to hands on experience with Eddy Current devices. Attendants are required to be certified by PSI as Visual Cylinder Inspectors, and current on the rating. Participate receive certification as Eddy Current Service Technician upon course completion. This course includes material and certificate for $185.00. If you have been previously trained as an Eddy Current Service Technician, you must be retrained at least every 3 years, and must attend the full course again. This will cost the full price of the course, at $185.00.

this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

this is a recertificion class. you must either be still active or with 90 days since it has expired. this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

This 2 hour course provides detailed information on O2 cleaning scuba cylinders for enriched air uses. This course has been endorsed by all major scuba cylinder manufacturers and valve manufacturers. You will learn proper cleaning techniques as well as understand the risk and liability. The cost of this course is $185.00.

Contact E.K. Sowell on cell with message or text for more information. We normally start at 10 am so you can drive in. Fee includes workbook, textbook, registration fees and instruction.

Contact E.K. Sowell on cell with message or text for more information. We normally start at 10 am so you can drive in. Fee includes workbook, textbook, registration fees and instruction.

this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

this is a recertificion class. you must either be still active or with 90 days since it has expired. this is a virtual class. class fees can be paid by either Vemo or Zelle class starts at 8AM east coast time.

VCI - Visual Cylinder Inspection® Course - This is the core certification course provided by PSI-PCI and in it we teach the regulations and fundamentals of conducting visual inspections of solid wall and composite SCUBA and SCBA cylinders. The full day course is suited for those new to visual inspection as well as those who have been inspecting without formal training through its wide range of inspection subjects including damage limits, neck cracking and other cylinder issues, plus laws affecting inspectors. Additionally, this course meets the OSHA and DOT requirements for employee HAZMAT training and attendants completing the course are qualified to conduct HAZMAT training for cylinder handlers. The course also provides an overview of a variety of associated topics including requalification, oxygen cleaning, valve repair, tools, and more. For more formal training on these topics refer to Specialties below. It is the only training formally endorsed, referred to and utilized by the cylinder manufacturers; and recognized by USDOT, Compressed Gas Association, NFPA and others. It continues to be the most up to date training available today on this subject. Previously certified inspectors may attend this full course under the VCIR for re-qualification (see below). The course is open to anyone 16 years or older and no previous cylinder inspection experience is required. Participants receive certificate for Visual Cylinder Inspection upon course completion valid for 3 years per Federal training requirements.

VRT - Valve Repair Technician - This course provides a broad overview of valve types, valve repair and valve care and maintenance. It is approved and contributed to by many valve manufacturers. Students will be provided a Certificate of Completion.